Safety assessment of the film boiling chemical vapor infiltration (FB-CVI) process through a system-theoretic accident model and process (STAMP)

Film boiling chemical vapor infiltration (FB-CVI) is considered as one of the fastest process methodologies for manufacturing carbon-carbon (C–C) composite products and possesses various advantages compared to conventional methodologies. However, there are safety concerns associated with this process for large-scale manufacturing, mainly owing to the intrinsic nature of the precursor and the process conditions. Considering the multifunctional interactions of the various systems during the process, a system-theoretic process analysis (STPA)/system theoretic accident model and process (STAMP) model is used to perform a safety analysis of the hazardous states of the FB-CVI process at the system level. As a case study, the FB-CVI process equipment employed for the manufacturing of C–C composites is considered. The safety constraints present in the system are assessed for adequacy through a hazard analysis by STPA/STAMP. The analysis through STPA/STAMP demonstrated the capability to create proactive strategies for the design and realization of process equipment that can be employed to manufacture C–C composite products through the FB-CVI process.     

关于长江产业带建设总体布局的初步思考

重点开发长江是90年代中国经济重大战略布署。将长江产业带建设成具有强大经济实力的国家一级经济轴线,宜采用分层次推进与中心辐射相结合的发展战略,以浦东开发和三峡建设为契机,加强基础产业,发展新兴产业和第三产业,优化产业结构,以能源和交通建设先行,改善基础设施。同时,要协调产业带建设与浦东开发、三峡工程建设的关系。     

安全评价方法在危险废物处置环境风险评价中的应用探讨

对安全评价方法在危险废物处置建设项目环境风险评价中的运用进行初步探索。主要用"工艺过程风险因素分析表"对工艺过程潜在风险性识别;用蒙德法进行源项分析;用池火灾模型、蒸气云爆炸伤害模型对易燃、易爆物质的火灾、爆炸等重大事故后果进行计算,得出人员的伤亡半径和财产损失半径等参数,以便于判断风险的可接受水平。分析结果表明:采用安全评价方法对危险废物处置建设项目进行环境风险评价是适用的、可行的。     

基于边介数的省域生态廊道构建方法优化

我国城市建设和生态保护工作均对土地资源有大量需求,二者之间的矛盾在经济优先发展区表现尤为明显.为了有效地改善生态环境,管控土地利用并引导其变化发展,需要建设具备不可替代特征的省域生态廊道.最小累积阻力模型（minimum cumulative resistance,MCR）是识别生态廊道最常用、有效的模型,但在应用于省域尺度时,MCR模型识别的潜在廊道路由存在冗余的问题.因此,通过引入网络科学中的边介数指数（edge-betweenness）对MCR模型进行优化,计算潜在廊道路由的边介数指数值,选取出其中最为重要和简明的结构来连通生态源地,即提取潜在路由中的骨干路由（backbone route）和关键战略点（key strategic point）作为不可替代的结构来指导省域生态廊道建设.将优化后的MCR模型应用于广东省,构建了全长5 493 km的省域生态廊道,其中包含生态源地20处,关键战略点11个,骨干生态廊道29条.骨干路由与关键战略点构成的不可替代省域生态廊道（irreplaceable provincial corridor）能够实现"廊道数量和占地面积最少、连通性基本不变"的目标.研究显示,边介数能够对潜在路由进行优化筛选,识别出维护省域生态安全的关键结构;不可替代生态廊道能够指导省域生态规划和土地空间的发展利用,并为更高水平的生态安全环境提供了演进的基础;同时也为土地资源紧张的地区提供了建设生态廊道的参考与依据.      

洪泽湖不同入湖河流沉积物磷形态特征及生物有效性

为揭示洪泽湖入湖河流沉积物磷形态空间差异性及影响因素,分析了洪泽湖自西北向西南7条入湖河流65个表层沉积物中不同磷（P）形态,并探讨了磷形态空间赋存特征的影响因素及环境意义.研究表明：沉积物总磷（TP）含量为488.90mg/kg~960.22mg/kg,无机磷（Pi）为主要形态,相对含量为65.81%~76.16%.西部入湖流域沉积物有机磷（Po）以非活性有机磷（NLOP）为主,汴河最高,相对含量约占Po的50.41%,生物有效态无机磷（BAP）相对含量最高,占Pi的66.84%,污染程度最高;西南和西北入湖流域Po则以中活性有机磷（MLOP）为主,Pi以钙结合态无机磷（HCl-Pi）为主.西北入湖流域由于受当地地质背景的影响,HCl-Pi所占Pi相对含量最高（43.02%）,从而减缓了磷的移动能力,污染程度最低.随着沉积物污染程度的增加,生物有效态Po含量增加,但所占Po相对含量降低;HCl-Pi含量增加,所占Pi相对含量降低,这一现象和我国其它典型地区沉积物磷形态空间分布类似.西部和西南入湖流域主要受水土流失、有机面源污染及藻类生长的影响,有机质环境较高,水交换能力弱,可被有机质降解的Po组分高于可被矿化的Po组分,大部分难降解Po组分易沉积,导致西部和西南入湖流域较高的BAP和NLOP含量,富营养化程度较高.沉积物OM是各形态磷之间相互转化的关键因素,和沉积物内源磷地球生物化学循环密切相关.洪泽湖入湖流域沉积物磷形态空间差异性主要由农业面源污染物的输入而导致内源磷负荷加剧.洪泽湖西部和西南入湖流域应重点控制农田水土流失及养殖业面源污染,建设滨岸修复带,遵循少量多次增施有机肥原则,减少农用地水土流失.健全农村养殖业废水废渣处理;划定科学养殖区;提倡铜围网箱,增加水体交换率.而对于洪泽湖西北入湖流域则应重点防止过度城镇化带来的水土流失及对生态功能保护区过高的污染负荷.     

北山地区大气降水中水化学及稳定同位素特征

为揭示甘肃北山地区大气降水的水化学及同位素特征,利用2012~2019年度采集的97件大气降水样品,采用相关性分析,富集因子,气团后向轨迹分析等多种方法对北山地区稳定同位素变化特征及其影响因素,降水中主要离子变化特征,不同离子来源及贡献,水汽来源进行了分析.结果表明,北山地区区域降水线的斜率与截距均高于张掖地区大气降水线;该区降水中稳定同位素比率明显受季节性,温度和高程效应的影响,在年尺度下,降雨量效应不明显;该区降水中氘盈余变化较大,雨季降水中氘盈余显著小于旱季降水中氘盈余值;北山地区大气降水的水化学型主要为HCO₃·SO₄-Ca和HCO₃-Ca型,降水中离子浓度具有明显的季节性变化,降雨量的增加对离子浓度具有一定的稀释作用;Na⁺受海源和陆源物质的双重影响;绝大部分的Ca²⁺,K⁺,HCO₃^-和部分Mg²⁺来源于陆源,SO₄^2-与NO₃^-的主要来自于人类活动输入;区内冬夏季水汽来源基本一致,来源于西北方向的季风源是北山地区最主要的水汽来源.研究成果可为我国高放废物地质处置库选址和性能评价以及未来地下处置库建设提供依据,也有助于丰富西北干旱区的水文循环过程研究.     

Exposure Assessment to Mercury Vapor in Chloralkali Industry

The aim of the study was to develop a sampling method aimed at individual sampling of mercury vapor and subsequent individualexposure assessment of the worker. Hopcalite available fromInowrocawskie Zakady Chemiczne (in Poland) was founduseful for mercury vapor sampling in active and passive individual samplers. However the sampling rate determined forpassive sampler in steady-state laboratory chamber cannot be usedunder fluctuating conditions of mercury vapor concentration andair movement typical for field measurement. In order to check comparativeness of passive and active sampling methods, sampleswere taken in the same time and individual samplers fixed toworker's clothes were used. Mercury vapor concentration wasmeasured at two chloralkali industries in Poland and the resultswere presented. Excessive exposure in both industries wasconfirmed by finding elevated mercury concentration in urinesamples from the workers.     

河西走廊灌溉农业发展的水资源承载能力分析

论文采用模糊综合评判方法,对河西走廊灌溉农业发展的水资源承载能力进行了分析,建立了评价的数学模型。研究表明,该区水资源开发利用已近于其饱和容量,发展节水灌溉,充分提高水的利用效率,是保障和发展干旱区农业的根本出路。     

利用多次回归拟合水的饱和蒸气压与温度的关系表达式

在使用于湿球测定锅炉烟气含湿量的过程中,需要查找水的饱和蒸气压,非常不方便.利用D-196和<化工原理>上册中取得部分数据,用多次线性回归的方法,拟合出水在0～200℃范围内的饱和蒸气压与温度的关系表达式;并对该表达式的误差进行了分析,误差均值为0.2‰,最大值也只有0.8‰,完全可以满足环境监测中数据处理的精度要求.     

Influence of new town development on the urban heat island - The case of the Bundang area

Five new towns have been developed around the Seoul metropolitan area since 1996. However, these new towns generate lots of traffic and related problems in the areas including those new towns and Seoul as a result of increases in population and a lack of ecological-self-sufficiency. Currently, construction of another new town is under deliberation, and what should be a major consider is the notion that the new town be located within a wide, green zone. Many studies have revealed that green space can play an important role in improving urban eco-meteorological capability and air quality. In order to analyze the urban heat island which will be created by the new urban development, and to investigate the local thermal environment and its negative effects caused by a change of land use type and urbanization, Landsat TM images were used for extraction of urban surface temperature according to changes of land use over the last 15 years. These data are analyzed together with digital land use and topographic information. As a study result, it was found the urban heat island of the study area from 198.5 to 1999 rapidly developed which showed a difference of mean temperature above 2.0. Before the Bundang new town construction the temperature of the residential area was the same as a forest, but during the new town construction in 1991 analysis revealed the creation of an urban heat island. The temperature of a forest whose size is over 50% of the investigation area was lowest, and thus the presence of a forest is believed to have a direct cooling effect on the urban environment and its surroundings. The mean temperature of the residential and commercial areas in the study was found to be 4.5 higher than the forest, and therefore this part of land use is believed to be the main factor causing the temperature increase of the urban heat island.